Electrical contractor / worker

Topics

Submitting a Preliminary Notice, Notice of Completion or Electrical Safety Certificate through eNotice is a very efficient and intuitive alternative to paper forms. The system automatically fills fields based on meter number and licensing details, meaning you do not have to manually enter this...
Submit an eNotice
Before you start lodging eNotices it is important that you take the time to set up eNotice correctly and in a way that works best for your electrical contracting business. Before Notices of Completion can be lodged, each Nominee (including those who also hold an Electrical Contractor licence) must...
Register for eNotice
To register, you need your licence number and the corresponding email address registered with Energy Safety . Enter your details and request a security code. We will send a one time security code to your registered mobile number or email address. Once you enter the security code and agree to the...
Register for eNotice
Electrical Contractors must provide Preliminary Notices, Notices of Completion and Electrical Safety Certificates for electrical work as required by the Electricity (Licensing) Regulations 1991. Preliminary Notices and Notices of Completion must be completed and provided to the relevant network...
eNotice
eNotice is a web based facility for the electronic lodgement of Preliminary Notices, Notices of Completion and Electrical Safety Certificates for electrical work. It is free to register and use. eNotice: sends (by email) a copy of the lodged notice to you and the relevant electricity network...
eNotice
Important electrical safety message from the Director of Energy Safety To Home owners Dear Sir / Madam No RCD means no second chance RCDs are the single most effective measure to prevent electrocutions, serious electrical injuries and fires. The circuit breakers and fuses in your electrical panel...
Residual Current Devices (RCD)
The use of eNotice is subject to a number of terms and conditions which must be acknowledged and accepted when registering. eNotice Terms and Conditions The terms and conditions can be viewed here Terms and Conditions
eNotice
On 16 December 2015, Mr Lex McCulloch the WorkSafe Western Australia Commissioner announced the Department of Commerce – WorkSafe Division (WorkSafe) would be undertaking a review of the model Work Health and Safety (WHS) Regulations for adoption in Western Australia. The key principles of the...
Developments in OSH in Western Australia
The public comment period for the Work Health and Safety Regulations for Western Australia Discussion paper ended on 31 August 2016. The Department of Commerce – WorkSafe Division (WorkSafe) is analysing submissions and will prepare a report for consideration by the Minister for Commerce...
Developments in OSH in Western Australia
Working on or near energised electrical equipment (live work) is the leading cause of burns, shocks, serious accidents and fatalities for electricians. Energy Safety ’s Code of Practice Safe Low Voltage Work Practices by Electricians sets out guidelines issued under the authority of Section 33AA of...
Information for industry

Pages

Publications

This application form is for an electrician's licence to carry out electrical fitting work on completion of the Gap Training Program (Gap Training), which resulted in the issue of a Certificate III...
EnergySafety
Form – application
12 May 2015
The following steps are recommended if you wish to appeal against an Inspector's Order issued to you by an Inspector (Electricity). Step one Contact the issuing inspector to clarify the issue...
EnergySafety
Information
30 Apr 2015
Explanatory notes Purpose of this document This document details the application and renewal processes for the designation of Inspectors (Electricity) in Western Australia. It also sets out the...
EnergySafety
Guide / handbook
30 Apr 2015
This document aims to assist people designated or applying to be designated as an Inspector (Electricity). It provides information on the categories of designation, the power and limitations of an Inspector (Electricity) under the Energy Coordination Act 1994 , and the standard of conduct that an Inspector (Electricity) is expected to maintain when carrying out their duties.
EnergySafety
Code of practice
22 Jun 2016
In April 2014, Energy Safety published Guidelines for the safe management of high voltage electrical installations. The purpose of the document was to provide advice to ‘responsible persons’ for...
EnergySafety
Fact sheet
30 Apr 2015
Oil-insulated high voltage (HV) combined-fuse switches Order 02-2015 issued to all persons working on and owners and operators of oil-insulated high voltage combined-fuse switches Preliminary...
EnergySafety
Reports
21 Jan 2016
This application form is used to apply for a variable speed drives permit.
EnergySafety
Form – application
18 Feb 2015
L & C fuse switches Order 01-2015 issued to all persons working on and owners and operators of Long and Crawford oil-insulated high voltage combined-fuse switches Preliminary Pursuant to s.18B of...
EnergySafety
Reports
21 Jan 2016
This application form is used to apply for a medical imaging equipment permit.
EnergySafety
Form – application
04 Feb 2015
This application form is used to apply for a university technician's electrical worker's permit.
EnergySafety
Form – application
10 Dec 2014

Pages

Announcements

A Bunbury electrical contracting business and one of its employees have been fined a total of $44,800 over the 2013 electrocution of an 18-year-old trades assistant in the roof space of a home in East Bunbury. JCW Electrical Pty Ltd pleaded guilty to failing to provide and maintain a safe workplace and was fined $38,000 in the Bunbury Magistrates Court today. Licensed electrician Dale Francis...
EnergySafety / WorkSafe
Media release
06 Feb 2015
After fifteen years being based at the Forrest Centre on St Georges Terrace in Perth, Consumer Protection has moved to a new CBD location. The main location is Gordon Stephenson House, 140 William Street Perth with front counter services available on Level 2. The move is in line with the state government's plan to consolidate existing office space for the public service. Consumer Protection’s...
Consumer Protection
Media release
30 Sep 2014
Electrical safety regulator Energy Safety will launch a public awareness campaign next month to alert property owners with overhead power lines about their legal responsibilities.
EnergySafety
Media release
18 Sep 2014
Western Australian home and business owners are being urged to contact their builders or electrical contractors to determine the brand of electrical cabling installed in homes or business premises following a national safety recall of Infinity brand cables which don’t comply with Australian safety standards. Energy Safety advises licensed electrical contractors who know or suspect they have...
Building Commission / Consumer Protection / EnergySafety / Corporate
Media release
27 Aug 2014
On 12 August 2014, the Minister for Commerce, Hon Michael Mischin MLC announced that a Western Australian version of the model Work Health and Safety (WHS) bill would be introduced shortly into State Parliament. This will be in the form of a green bill, which will be released for a consultation period of three months. More information
WorkSafe
Department News
13 Aug 2014
Over the next few months Commerce divisions will be relocating, starting with WorkSafe on 15 August. Some phone numbers and addresses will change, so keep an eye on our information page about the coming moves .
Building Commission / Consumer Protection / EnergySafety / Industry Development / Labour Relations / WorkSafe / Corporate
Department News
07 Aug 2014
Unfortunately there was an error in the media release headed “Warning issued on dangerous solar isolating switches” date May 21, 2014.
EnergySafety
Media release
22 May 2014
Energy Safety has issued a public warning about dangerous switches used in some solar systems installed since January 1, 2012. Director of Energy Safety Ken Bowron said today the switches formed part of all solar photo-voltaic installations. “They are used to disconnect the current produced by solar panels so electricians can work safely on the electrical installation of a home or business,” Mr...
EnergySafety
Media release
21 May 2014

Pages

Subscribe to Topics
Subscribe to RSS - Electrical contractor / worker