Electrical contractor / worker

Topics

eNotice is a web based facility for the electronic lodgement of Preliminary Notices, Notices of Completion and Electrical Safety Certificates for electrical work. It is free to register and use. eNotice: sends (by email) a copy of the lodged notice to you and the relevant electricity network...
eNotice
Important electrical safety message from the Director of Energy Safety To the Home Owners Dear Sir / Madam No RCD means no second chance Residual current devices (RCDs) are the single most effective measure to prevent electrocutions, serious electrical injuries and fires. The circuit breakers and...
Residual Current Devices (RCD)
The use of eNotice is subject to a number of terms and conditions which must be acknowledged and accepted when registering. eNotice Terms and Conditions The terms and conditions can be viewed here Terms and Conditions
eNotice
The Code of Practice (CoP) aims to assist people designated or applying to be designated as an Inspector (Electricity). Code of Practice for Inspectors Electricity Click the link below to access the CoP and related documents Code of Practice for Inspectors Electricity
Inspectors electricity
The guidelines for the safe management of high voltage electrical installations are issued under Section 33AA of the Electricity Act 1945 (WA) by the Director of Energy Safety and endorsed by WorkSafe. Safe management of high voltage (HV) installations Information on the Guidelines and supporting...
Information for industry
The code details the requirements for vegetation control work carried out near the live conductors of overhead power lines. Code of Practice for Vegetation worker electrical safety Information on the Code and the online assessment Code of Practice for Vegetation worker electrical safety and the...
Information for industry
Restricted plumbing permits allow eligible gasfitters and electricians to disconnect, remove, install and connect a compression union, a temperature/pressure relief valve or an expansion control valve in the course of removing, removing and reinstalling or replacing a water heater on a strictly...
Initial grant of licence
A national recall is being coordinated by a taskforce chaired by the Australian Competition and Consumer Commission (ACCC). Energy Safety , Consumer Protection and the Building Commission are working with the taskforce as the WA regulators. The sub-standard cables, imported by Infinity Cable Co Pty...
Electrical installations
Infinity electrical cables were recalled due to safety concerns on 27 August 2014. If you had electrical work done during 2012 or 2013 to your house, rental or commercial property it is strongly recommended you contact your electrician and ask if they have used this product in your property. The...
Home safety
Please note: The Department of Mines, Industry Regulation and Safety will be affected by Western Power undertaking essential network maintenance and electrical work, which may impact our websites and services on Sunday 21 January 2018. There is a possibility that Energy Safety ’s services may be...
Services

Pages

Publications

This document aims to assist people designated or applying to be designated as an Inspector (Electricity). It provides information on the categories of designation, the power and limitations of an Inspector (Electricity) under the Energy Coordination Act 1994 , and the standard of conduct that an Inspector (Electricity) is expected to maintain when carrying out their duties.
EnergySafety
Code of practice
29 Jun 2017
In April 2014, Energy Safety published Guidelines for the safe management of high voltage electrical installations. The purpose of the document was to provide advice to ‘responsible persons’ for...
EnergySafety
Fact sheet
30 Apr 2015
Oil-insulated high voltage (HV) combined-fuse switches Order 02-2015 issued to all persons working on and owners and operators of oil-insulated high voltage combined-fuse switches Preliminary...
EnergySafety
Reports
21 Jan 2016
This application form is used to apply for a variable speed drives permit.
EnergySafety
Form – application
18 Feb 2015
L & C fuse switches Order 01-2015 issued to all persons working on and owners and operators of Long and Crawford oil-insulated high voltage combined-fuse switches Preliminary Pursuant to s.18B of...
EnergySafety
Reports
21 Jan 2016
This application form is used to apply for a medical imaging equipment permit.
EnergySafety
Form – application
04 Feb 2015
This application form is used to apply for a university technician's electrical worker's permit.
EnergySafety
Form – application
10 Dec 2014
Private overhead power lines Power lines which transport electricity from your main switchboard and meter to your home or other buildings are private power lines. This includes the pole where the...
EnergySafety
Brochure
17 Sep 2014
General It is a requirement of Regulation 45(1) of the Electricity (Licensing) Regulations 1991 that an electrical contractor shall ensure that his/her electrical contractor’s licence number appears...
EnergySafety
Information
03 May 2018
Wood Pole Order 01-2009 issued to Western Power under Section 18B of the Energy Coordination Act 1994.
EnergySafety
Reports
12 Jun 2014

Pages

Announcements

Some WA homes and business premises may be facing a serious fire risk if they have had sub-standard electrical cabling installed which is not replaced soon. In August last year, the inferior cabling imported by Infinity Cable Co Pty Ltd (in liquidation) was the subject of a national recall, with about 40,000 homes and businesses believed to be affected throughout Australia. The cabling does not...
Consumer Protection
Media release
17 Jun 2015
Working on or near energised electrical equipment (live work) is the leading cause of burns, shocks, serious accidents and fatalities for electricians. Energy Safety ’s Code of Practice Safe Low Voltage Work Practices by Electricians sets out guidelines issued under the authority of Section 33AA of the Electricity Act 1945 (WA). WorkCover NSW has recently released an electrical safety video...
EnergySafety
Department News
16 Jun 2015
Energy Safety has issued additional safety precautions for the type of high voltage (HV) switches involved in the 3 February Morley Galleria Shopping Centre explosion. The first Order pertained to only Long & Crawford Manchester switchgear. Energy Safety has now extended the Order to all HV oil-insulated combined-fuse switches. Announcing this today, the Director of Energy Safety, Ken Bowron...
EnergySafety
Media release
24 Mar 2015
Energy Safety has imposed new safety precautions for the type of high voltage (HV) switches involved in the 3 February Morley Galleria Shopping Centre explosion. The HV oil-insulated combined-fuse switches produced by Long & Crawford Manchester must be completely disconnected from the electricity supply before any person may open the switch’s lid. Announcing this today the Director of Energy...
EnergySafety
Media release
13 Feb 2015
A Bunbury electrical contracting business and one of its employees have been fined a total of $44,800 over the 2013 electrocution of an 18-year-old trades assistant in the roof space of a home in East Bunbury. JCW Electrical Pty Ltd pleaded guilty to failing to provide and maintain a safe workplace and was fined $38,000 in the Bunbury Magistrates Court today. Licensed electrician Dale Francis...
EnergySafety / WorkSafe
Media release
06 Feb 2015
After fifteen years being based at the Forrest Centre on St Georges Terrace in Perth, Consumer Protection has moved to a new CBD location. The main location is Gordon Stephenson House, 140 William Street Perth with front counter services available on Level 2. The move is in line with the state government's plan to consolidate existing office space for the public service. Consumer Protection’s...
Consumer Protection
Media release
30 Sep 2014
Electrical safety regulator Energy Safety will launch a public awareness campaign next month to alert property owners with overhead power lines about their legal responsibilities.
EnergySafety
Media release
18 Sep 2014
Western Australian home and business owners are being urged to contact their builders or electrical contractors to determine the brand of electrical cabling installed in homes or business premises following a national safety recall of Infinity brand cables which don’t comply with Australian safety standards. Energy Safety advises licensed electrical contractors who know or suspect they have...
Building Commission / Consumer Protection / EnergySafety / Corporate
Media release
27 Aug 2014
On 12 August 2014, the Minister for Commerce, Hon Michael Mischin MLC announced that a Western Australian version of the model Work Health and Safety (WHS) bill would be introduced shortly into State Parliament. This will be in the form of a green bill, which will be released for a consultation period of three months. More information
WorkSafe
Department News
13 Aug 2014
Unfortunately there was an error in the media release headed “Warning issued on dangerous solar isolating switches” date May 21, 2014.
EnergySafety
Media release
22 May 2014

Pages

Subscribe to Topics
Subscribe to RSS - Electrical contractor / worker